corner hydroslide Shower door



The NEW Series Hydroslide Sliding Shower Door Kits were designed for full standing showers or above bathtubs. The Hydroslide System can accommodate a wide range of shower designs with fixed glass panels on either end, or both sides at 90 or 180 degrees. The Hydroslide System also accommodates the option of floor-to-near-ceiling glass panels with a sliding door. Hydroslide Sliding Shower Door Kits feature the latest European ‘all-glass’ look. Kits are available in either 60″ (1.52 m) or 84″ (2.13 m) widths. Installers can cut the width to size, and height is optional as long as the sliding door glass weighs less than 88 lbs. (40 kg). The 180 Degree Wall-to-Wall Installation only requires the 180 Degree Standard Kit for the installation.


Glass Thickness: 3/8″ or 5/16″ (10 or 8 mm) 
Material: Aluminum & Brass 
Maximum Door Size:  88 Pounds (40 kg) for Door 
Glass Fabrication Required:
One  3/4″ (19 mm) Diameter Hole Per Roller;
Two 3/4″ (19 mm) Diameter Holes Per Fixed Panel