• Pre-Set 5 Degree Pin for Tighter Door Closure
• Available in Several Beautiful Finishes
• 3 Year Warranty
Prima Series Pivot Hinges are designed for use with 5/16" (8 mm) to 3/8" (10 mm)
tempered safety glass, and provide an extra number of application possibilities. Some
advantages of pivot type hinges include the fact that they carry the majority of the weight
on the bottom, and have the ability to be inset from the wall, enabling clearance for towel
bars and other projections. Prima Series Pivot Hinges are self-centering, with four springs
for maximum retention strength. In addition, Pre-Set 5 Degree Hinge models are
available (see page J119). The Prima Series is adaptable to our Deluxe Header System
for shower enclosures not going all the way up to the ceiling
• Available in Several Beautiful Finishes
• 3 Year Warranty
Prima Series Pivot Hinges are designed for use with 5/16" (8 mm) to 3/8" (10 mm)
tempered safety glass, and provide an extra number of application possibilities. Some
advantages of pivot type hinges include the fact that they carry the majority of the weight
on the bottom, and have the ability to be inset from the wall, enabling clearance for towel
bars and other projections. Prima Series Pivot Hinges are self-centering, with four springs
for maximum retention strength. In addition, Pre-Set 5 Degree Hinge models are
available (see page J119). The Prima Series is adaptable to our Deluxe Header System
for shower enclosures not going all the way up to the ceiling
| Additional Info | SPECIFICATIONS
Glass Thickness Range:
5/16" (8 mm) to 3/8" (10 mm) Tempered Safety Glass Special Feature:
hinges can reduce quantity of cut-outs required when compared to standard side mount
glass-to-glass hinges. Cat. No. PPH01 can be mounted floor and ceiling, or floor and header
Top and Bottom Mount design allows more glass to show. Use of these Construction:
Solid Brass Hinge Swings:
Full Rotation Closing Type:
Self-Centering When Within 15 Degrees of Closed Position Cut-Out Required
Except Cat. No. PPH135 which requires cut-out plus two 1/2" (12 mm) holes Includes:
Gaskets, Phillips Screws, and Glass Fabrication Dimensions NOTE:
Optional Allen screw package included with each Hinge produced from Mid-2007.
|
|---|
Shower Door Catalog
Frameless Shower Door Hardware Catalog features the largest selection of products available for the shower door industry.
