Oversized U-Clamps Fixed Panel Oversized
U-Clamps are especially recommended for 1/2" (12 mm) thick glass installations where a hole drilling measurement of one and a half times glass thickness (from the edge of the glass to the closest edge of the hole) is required by the temperer. Clear silicone can be used to seal the gap and provide a clean water resistant appearance.
SPECIFICATIONS:
Glass Thicknesses: 5/16" (8 mm) to 1/2" (12 mm)
Size: 1-3/4" (44 mm) wide x 1-15/16" (49 mm) high
Material: Solid Brass
Includes: Mounting Screw and Clear Gaskets
Hole Diameter Required: 5/8" (16 mm) or 3/4" (19 mm)
Extra Gaskets Sold Separately: Cat. No. UCG77
U-Clamps are especially recommended for 1/2" (12 mm) thick glass installations where a hole drilling measurement of one and a half times glass thickness (from the edge of the glass to the closest edge of the hole) is required by the temperer. Clear silicone can be used to seal the gap and provide a clean water resistant appearance.
SPECIFICATIONS:
Glass Thicknesses: 5/16" (8 mm) to 1/2" (12 mm)
Size: 1-3/4" (44 mm) wide x 1-15/16" (49 mm) high
Material: Solid Brass
Includes: Mounting Screw and Clear Gaskets
Hole Diameter Required: 5/8" (16 mm) or 3/4" (19 mm)
Extra Gaskets Sold Separately: Cat. No. UCG77
| Additional Info | Note: The stud that goes through the hole made in the glass is positioned further from the edge of the glass than that of the Standard U-Clamp. This makes the Oversized U-Clamp the preferred clamp of most Temperers for 1/2 inch (12 millimeter) thick glass. SPECIFICATIONS: |
|---|
Shower Door Catalog
Frameless Shower Door Hardware Catalog features the largest selection of products available for the shower door industry.
